102
Homage inverter fault codes 3.2kva bolt
In a pdf file, you can also download the homage inverter fault codes 2024 described below. this article will help you diagnose your inverter fault easily at home.
Fault code | Fault details | |
| 01 | The fan is locked when an inverter is off | |
| 02 | Over temperature or NTC is not connected well | |
| 03 | Battery voltage is too high | |
| 04 | Battery voltage is too low | |
| 05 | Output short-circuited or over temperature is detected by internal converter components | |
| 06 | Battery voltage is too high | |
| 07 | Overload time out | |
| 08 | The bus voltage is too high | |
| 09 | Bus soft start failed | |
| 51 | Over current or surge | |
| 52 | Bus voltage is too low | |
| 53 | Inverter soft start failed | |
| 55 | Over dc voltage in ac output | |
| 57 | Current sensor failed | |
| 58 | The output voltage is too low | |
| 59 | Pv voltage is over-limitation |
download in pdf
Homage inverter warning codes 3.2 kva bolt series:
code | details | alarm |
| 01 | The fan is locked when the inverter is on | Beep three times every second |
| 02 | Over Temperature | none |
| 03 | The battery is overcharged | Beep ones every second |
| 04 | Low battery | Beep ones every second |
| 07 | Overload | Beep ones every 0.5 second |
| 10 | Output power derating | Beep twice every 3 seconds |
| 15 | Pv energy is low | Beep twice every 3 seconds |
| 16 | High ac input(>280v ac) | none |
| 30 | Communication failure b/w inverter and communication board | none |
download in pdf
